Description

The new Zealous bearings will make your friends jealous when you’re beating them down the hill! The machined precision 8mm axle holes fit snug on the axle reducing slop. The Zealous bearings have green rubber inner and outer seals to keep dirt, debris, and thane out of the bearings. When testing the bearings are pre-lubricated with Archoil Nanoceramic Grease is a long-lasting grease that will break in after a session or two. The grease that Zealous uses helps eliminate friction over time and reduces corrosion on the inside of the bearings. We recommend trying out a set of the Zealous Bearings before you head out to your favorite hills.

Precision 8mm axle holes
.4045″ built in spacers
.5mm built in speedrings
Green rubber seals to keep dirt and debris on the outside of the bearing.
Lubed with Archoil Nanoceramic Grease
-The unique feature of our lubricant is how the nanoceramic compound fills in deformations or asperities in the bearing. These deformations cause friction and heat around them which hardens the nano-ceramic compound to that specific area. This micro coating is 5 times the hardness of the host alloy and has a molecular bond with the host metal, filling in all the asperities and eliminating friction over time.
-The coefficient of friction is the lowest in the field of Tribology at 0.003% creating a near frictionless surface. Mainly because the nanoceramic compound eliminates all asperities.
-Extremely low water washout
-Corrosion on the inside of the bearing is nearly eliminated.
Sold in sets of 8 bearings.